Digital Monitoring Products Canadian XR100 Bedienerhandbuch PDF herunterladen (Seite 61)

XR100 Series Programming Guide Digital Monitoring Products

Zone InformatIon

ARM AREAS: PERIM

InanAll/PerimeterorHome/Sleep/Awaysystem,thisspeciestheareatobe

armedbytheKeyFobbuttonbeingprogrammed.ForAll/Perimetersystems,

choosePERIMorALL,forHome/Sleep/AwayorHome/Awaysystems,choose

HOME,SLEEP,orAWAY.

Note:Areas3andhigherinanAll/Perimetersystem,andareas4andhigherina

Home/Sleep/Awaysystemarenotavailableforuse.

Afterselectingtheareas,forone-buttonkeyfobstheZoneNo.:optiondisplays.

Fortwo-buttonorfour-buttonkeyfobs,theKeyFobButtonSelectionoption

displays to program additional buttons.

18.11.10

OUTPUT NO: XXX

Output Number

YoucanspecifyarelayoutputtooperatewhenOUT(Output),PN(Panic),PN2

(Panic2),EM(Emergency),orEM2(Emergency2)isselectedforakeyfob

ButtonActionandthebuttonispressed.Validrangeis1to6,500to599,

D1toD8,orG1toG20.ForanoutputturnedonbyaPN,PN2,EM,orEM2

button action, the output turns off when any area is disarmed.

To enter an output number, press a top row Select key followed by the output

number. Press the COMMAND key.

18.11.11

ACTION: XXXXXXXX

Output Action

ThisoptionallowsyoutodenetheKeyFoboutputoperation(STD,MOM,TGL,

OFF)whenPN,PN2,EM,orEM2isselectedforaKeyFobButtonActionandthe

buttonispressed.ForanoutputturnedonbyaPN,PN2,EM,orEM2button

action, the output turns off when any area is disarmed by Key Fob button press.

The currently programmed action displays.

OUTPUT ACTION?

STD PLS MOM TGL

STD (Steady) - The output is turned on and remains on until the area is

disarmed, an output cutoff time expires, or the output is reset from the keypad

menu.

PLS (Pulse) - The output alternates one second on and one second off. Note:

ThepulsingrateforaModel716relayattachedtotheLX-Busis1.6seconds.

MOM (Momentary) - The output is turned on only once for one second.

TGL (Toggle) - The output alternates between the armed and disarmed

condition. When restored to normal, no action occurs. When the zone opens

fromanormal(disarmed)state,atroubleisreported.Whenopenedfroma

shorted(armed)state,analarmisreportedandthezoneisdisableduntilthe

area(s)isdisarmedfromeitherakeypadorRemoteLink.

OUTPUT ACTION?

OFF

OFF (Off) - The output is turned off. If programmed, the output was turned

on by some other means such as another button press, a zone action, or a

schedule.

18.11.12

NEXT ZONE NO YES

Next Zone

SelectYEStoreturntotheZONENO:-optiontoprogramanewzone.SelectNO

to display the Alarm Action option.

Note: All wireless programming is stored in the XR500 Series panel. The 1100X

Wireless Receiver obtains the necessary programming information from the

panel each time the receiver powers up, when the programmer STOP routine

is selected or the panel is reset. The receiver memory refresh takes up to 10

seconds to complete depending on the number of wireless zones programmed

andtheRedLEDremainsonduringthistime.Normalreceiveroperationis

inhibited during the memory refresh period.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Monitoring Products Canadian XR100 Bedienerhandbuch Seite 61

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Monitoring Products Canadian XR100