Digital Monitoring Products Canadian XR100 Bedienerhandbuch PDF herunterladen (Seite 25)

XR100 Series Programming Guide Digital Monitoring Products

Device Setup

If you do not enter any area numbers, all users with Door Access authority receives a

dooraccesswithoutregardtoschedules.IftheusercodeisprogrammedforAnti-Pass

YES,thentheuserisloggedintoallmatchingareas.Thisuserisnotallowedtoaccess

theseareasagainuntiltheyhaveegressedthearea.SeeEgressAreas.

When all areas accessed by a door are armed, the door is locked by the panel.

Note: For an All/Perimeter, Home/Sleep/Away, or Home/Sleep/Away with Guest

system, Access Areas should be left at factory default settings.

6.8

1 2 3 4

5 6 7 8

EGRESS AREAS:

Egress Areas

PresstheCOMMANDkeytoprogramEgressAreas.Toselectanarea,enterthearea

number using the digit keys on the keypad. When an area is selected, an asterisk

appearsnexttotheareanumber.Enterthenumberagaintodeselectthearea.

Refer to the Multiple Displays section at the beginning of this document.

Note: For an All/Perimeter, Home/Sleep/Away, or Home/Sleep/Away with Guest

system, Egress Areas should be left at factory default settings.

Note: If an area is programmed as an access area, it cannot be programmed as an

egressareaandthereforedoesnotdisplayduringEgressAreasprogramming.

UsethisoptiontodetectAnti-passbackviolations.Anti-passbackrequiresauserto

properlyexit(egress)anareatheyhavepreviouslyaccessed.Ifusersfailtoexit

through the proper card reader location they are not granted access on their next

attempt.Usersmusthavematchingaccessareanumbersassignedtotheirprole,

toreceiveadooraccessatthisdevice.IftheuserisprogrammedforAnti-Pass

YES, then the user is logged out of all matching areas. This allows the user to again

access the area. See Access Areas section.

If you do not enter any area numbers, all users with Door Access authority receives

adooraccesswithoutregardtoschedules.IfyouarenotusingtheAnti-Pass

feature leave Egress Areas blank.

6.9

*1 *2 *3 *4

*5 *6 *7 *8

DISPLAY AREAS:

Display Areas

Press the COMMAND key to program Display Areas. To select an area between 1 and

8,entertheareanumberusingthekeypaddigitkeys.Whenanareaisselected,

anasteriskappearsnexttotheareanumber.Enterthenumberagaintodeselect

the area. Default is all area numbers. Refer to the Multiple Displays section at the

beginning of this document.

Display Areas allows the XR100 Series burglary activities to be segmented so that

onlyspecicarea(s)andtheirassociatedoperationappearataparticularkeypad.

Areanumber(s)selectedinthiseldaffectthewayusersinteractwiththesystem

from this particular device. For example: Program Device 1 to show only the zone

activities and armed status of Area 1.

Entertheareanumber(s)thatthiskeypadistodisplay.Thisallowsspecicarea

controlfromspecickeypads,aswellasannunciationofzonesassignedtothose

area(s).WhenDisplayAreasisleftdefaulted(allareasselected),MenuDisplay

andStatusListitemsdeterminewhetherzonealarmsandtroublesdisplayatthis

device, regardless of area assignment. Also, all system areas may be armed and

disarmed from this device.

Note: For an All/Perimeter or Home/Sleep/Away system, Display Areas should be

left at factory default settings.

ForHome/Sleep/AwaywithGuestarmingsystems,theDisplayAreasselection

determineswhichsystemthekeypadarmsanddisarms.Withareas1,2or3beingthe

rstareasselected,thekeypadisassignedtotheMainsystem.Witharea4,5or6

beingtherstareasselected,thekeypadisassignedtotheGuestsystem.

User Action Allowed

Whenanarea(s)isselected,thefollowinguseractionsareallowed:

•ArmingorDisarmingofthearea(s)selectedfromtheARMorDISARMmenu

•AlarmSilenceforthearea(s)selected

•ZoneBypassofzonesassignedtothearea(s)selected

•ZoneMonitorofzoneassignedtothearea(s)selected

•Shiftschedulechangesallowedforthearea(s)selected

•ClosingCheckScheduleExtendisallowedforthearea(s)selected

•DoorScheduleschangesareallowedfordevicesthathaveamatchingarea(s)as

denedinDeviceAccessAreas

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Monitoring Products Canadian XR100 Bedienerhandbuch Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Monitoring Products Canadian XR100