Digital Monitoring Products XR550 Bedienerhandbuch PDF herunterladen (Seite 48)

Digital Monitoring Products XR150/XR350/XR550 Series Programming Guide

PC LOG REPORTS

PC Log Reports

16.1 PC Log Reports

This section allows you to program the types of PC Log Reports the panel sends through the

J1 Ethernet Port directly on the panel. The reports include information such as the type of

activity, time and date of the activity, and user name and number. These data reports can

be accessed from a PC using the Advanced Reporting Module. See the XR150/XR350/XR550

Series Installation Guide (LT-1233) for detailed J1 setup information or the XR150/XR350/

XR550 Series User’s Guide (LT-1278) for more information.

Note: The network connection that sends PC Log Reports is not monitored for network

trouble. The PC Log Reports option should NOT replace the primary communication method

or act as a backup communication method.

If there is trouble with the network connection, the panel continues to attempt to send the

PC Log Reports until the connection is reestablished. The panel then sends the reports. A

Network Trouble message is NOT sent if the connection is lost since this report tool is not

designed to be monitored by a receiver. The PC Log Reports have the lowest priority of

panel reports sent.

Note: The PC Log Address String entered CANNOT be the same as that entered in

Communication.

16.2 Net IP Address

This option displays when the Communication Type for PC Log Reports is NET. Enter the

IP address containing up to 16 characters. The Net IP Address must be unique and cannot

be duplicated on the network. Enter all 12 digits and leave out the periods. For example,

enter IP address 192.168.0.250 as 192168000250. The periods display automatically. The

default is 000.000.000.000 and turns the output off.

16.3 Net Port

This option displays when Communication Type for PC Log Reports is Net. Enter the Port

number. Valid numbers are from 0 to 65535. Default is 2001.

16.4 Arm and Disarm Reports

Sends arming, disarming and Late to Close events. Includes the area number, name and

action, the user number and name, and the time and date.

16.5 Zone Reports

Sends changes in the status of active zones. Includes the zone number, name, type, the

action (alarm, trouble, bypass, etc.), user number (if applicable), and area name. For a

Walk Test, Verify and Fail messages are sent for each zone.

16.6 User Command Reports

Sends user code changes, schedule changes, and door access denied events.

16.7 Door Access Reports

Sends door access activity: door number, user number and name, and time and date.

16.8 Supervisory Reports

Sends system monitor reports, such as AC and battery, and system event reports.

Supervisory Reports also sends the following reports:

• Abort • Exit Error • Ambush

• System Recently Armed • Alarm Bell Silenced • Unauthorized Entry

• Late to Close*

* Only sent as a Supervisory Report if Area Schedules is not enabled, Closing Check is

enabled, and an opening/closing schedule has been programmed.

Note: To send these reports to the PC Log, you must enable SUPV MSG.

16.9 PC Log Real-Time Status

Select YES to send Real-Time Status reports for zones, doors, and outputs. The specic

reports must also be selected by individual zone or output. The Real-Time Status messages

are sent to a PC running a graphic display software. Default is NO.

The messages that can be sent are:

• Door Open with zone number

• Door Closed with zone number

• Door Open with door number

• Door Closed with door number

• Output On

• Output Off

• Output Pulse

• Output Temporal

PC LOG REPORTS

NET IP ADDRESS

000.000.000.000

NET PORT 2001

ARM/DIS NO YES

ZONE NO YES

USR CMDS NO YES

DOOR ACS NO YES

SUPV MSG NO YES

PC LOG REAL-TIME

STATUS

NO YES

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Monitoring Products XR550 Bedienerhandbuch Seite 48

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Monitoring Products XR550