Digital Monitoring Products XR550 Betriebsanweisung PDF herunterladen (Seite 22)

18 XR150/XR350/XR550 User Guide Arming and Disarming

System Ready/System Not Ready

When all zones in the system are in a normal condition and can

be armed without bypassing, the keypad displays SYSTEM READY.

Ifthereareoneormorezonesthatarenotinanormalcondition,

the keypad displays SYSTEM NOT READY. Pressing any Select key

duringthisdisplayshowsthezonenumberandnameallowingyou

to investigate the problem.

All/Perimeter Shortcut Key Arming

Arm Perimeter —Press6for2seconds.

Arm All — Press 1 for 2 seconds.

Arming an All/Perimeter System

Enter your 4-digit user code. The keypad displays PERIM ALL.

2. Select PERIM to arm the Perimeter area only.

3. Select ALL to arm both the Perimeter and Interior areas.

4. Thekeypaddisplayszonesthathavebeenbypassedpriorto

armingandzonesthatarenowinafaultedcondition.

5. Atthispointyoucanforcearmorbypassanyfaultedzones.

Azonethatis forcearmed isrestoredinto thesystem ifit

laterreturns to normal.A bypassed zone remains bypassed

until the system is disarmed. See steps 5a through 5d.

5a. Ifaproblemexistsonanyzones,thezonenameandproblem

displayfollowedby:OKAYBYPASSSTOP.

5b. SelectOKAYtoforcearmthezone(s)beforearming.

5c. SelectBYPASStobypassthezone(s)beforearming.

5d.SelectSTOPtostopthesystemfromarming.Correctthezone

problem(s)andreturntostep1.

6. ThekeypaddisplaysPERIMETERONifonlytheperimeteris

beingarmedandALLSYSTEMONifboththeperimeterand

interior are being armed.

6. Afterallareashavedisplayedandschedulesextended,any

alarms or communication problems that occurred during the

armed period display.

7. If all areas have been disarmed, the keypad next displays ALL

SYSTEMOFF.

Quick Disarming

To quickly disarm a desired area, enter the area number followed

by the COMMANDkeywhentheALL? NO YES option displays.

All/Perimeter System Arming

Area Assignment: Your security system is divided into two

separate areas. Motion detectors, inside doors, and other interior

protection devices are assigned to the Interior area while windows

and exterior doors are assigned to the Perimeter area.

Perimeter or All: When arming an All/Perimeter system, the

keypad displays PERIM ALL. If you select ALL, you are arming

both the Perimeter and the Interior areas of the system. You will

want to arm both of these areas when leaving the premises with

nobody left inside. Selecting PERIM arms only the perimeter of the

system. Perimeter arming is when you’re staying inside but want

the comfort of knowing the exterior doors and windows are armed.

Perimeter arming allows you to move freely about inside without

setting off any interior alarms.

Instant: During the exit delay time, you can cancel the exit and

entrydelaysandcauseallzonestobeinstantzones.Justpressthe

far right Select key under INSTNT while the exit delay is displayed.

Thisimmediatelyarmstheexitzones.However,noentrydelayis

provided and an alarm will occur should an entry door be opened.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Monitoring Products XR550 Betriebsanweisung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Monitoring Products XR550