Digital Monitoring Products XR550 Betriebsanweisung PDF herunterladen (Seite 12)

8 XR150/XR350/XR550 User Guide Introduction

Special Keypad Tones

Your keypad also contains a small speaker that alerts you about

events as they occur on your system. For burglary alarms, as soon

astherstdigit keyis pressedto entera usercode, thekeypad

tone stops. If a valid user code is not entered or an invalid user

code is entered within ve seconds, the tone begins sounding

again. Below are brief descriptions of the different tones you hear

from the keypad.

Fire Alarm tone:Asweepingsirenthatsoundsuntiltherealarm

is silenced.

Burglary Alarm tone: A constant siren tone that continues until

the alarm is silenced.

Key press tone: A short beep each time you press a key on the

keypad and it is acknowledged by the system.

Prewarn tone: A pulsed tone that sounds when you open an entry

delay door on a system that is armed (turned on)remindingyou

to disarm the burglary protection. The tone silences as soon as

therstusercodedigitkeyispressed.Ifavalidusercodeisnot

enteredoraninvalidusercodeisenteredwithinveseconds,the

prewarn tone begins sounding again.

Exit tone: A pulsing tone that sounds during the exit countdown

just after arming all areas of your system to remind you to exit the

premise. At ten seconds prior to the end of the countdown, the

rate of pulsing increases.

Monitor tone: A pulsed tone for one second, one pulse only that

sounds whenever a door or window is opened while you are using

thezonemonitorfunctionfromtheUserMenu.SeeZoneMonitor.

Note:When toggling to a RMV monitor state, the Zone Monitor

tone does not sound.

Graphic Touchscreen Keypads: Set the backlight illumination and

AC Power/Armed LED brightness level. In the touchscreen display

belowSETBRIGHTNESS,presstheleft<tolowerandtheright>to

raise the backlight brightness. If the brightness level is lowered,

it reverts to maximum intensity whenever the screen is pressed

during normal operation. If the screen is not pressed, and the

speaker has not sounded for 30 seconds, the user-selected standby

brightness level restores.

Internal Speaker Tone

Set the tone of the keypad internal speaker. At the SET TONE

display, use the top left Select key to make the tone lower. Use the

right Select key to make the tone higher.

Volume level

Set the volume level of the keypad internal speaker for key

presses. During alarm, trouble, and prewarn conditions, the

volumeisalwaysatmaximumlevel.AtSETVOLUMELEVEL,usethe

left Select key to lower the keypad volume. Use the right Select

key to raise the volume.

Model Number

Thinline™, Aqualite™, Wireless, Clear Touch, and

Graphic Touchscreen Keypads:

Thekeypadmodelnumber,rmwareversion,anddatedisplay,but

cannot be changed.

Serial Number

Thinline™ Wireless Keypads:

The serial number assigned to the keypad displays. Press the Back

ArrowkeytoexittheUserOptionsfunction.

Keypad Address

The current address assigned to the keypad displays, but cannot

be changed. Press the Back Arrow key to exit the User Options

function.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Monitoring Products XR550 Betriebsanweisung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Monitoring Products XR550