Digital Monitoring Products XTL Series Installationsanleitung PDF herunterladen (Seite 7)

XTL/XTLC Installation Guide Digital Monitoring Products

system components

Installation

4.1 Mounting Location Information

A location should be selected that is centrally located between the 1100 Series transmitters used in the

installation.InstalltheXTL/XTLCawayfrommetalobjects.Mountingthepanelonornearmetalsurfaces

impairsperformance.Whenselectingthepropermountinglocationofatransmitter,refertotheLEDSurvey

Operationsectionofthespecicinstallationguideforthetransmitterbeinginstalled.

4.2 Mounting the Enclosure

TheenclosurefortheXTL/XTLCpanelmustbemountedusingtheprovided#6screwsinthefourmounting

holesshowninFigure1.Mounttheenclosureinasecure,dryplaceawayfrommetalobjectstoprotect

thepanelfromdamageduetotamperingortheelements.Mountthepanelaminimumof4feetfromany

wireless transmitters or repeaters. It is not necessary to remove the PCB when installing the enclosure.

Mounting Hole Locations

RESET

LOAD

BAT

PROG

RED

PWR

MODEL XTL

TX RF RX

Figure 1: Mounting Hole Locations

Primary Power Supply

5.1 DC Input

MounttheXTL/XTLCpanelnearawalloutletfortheModel372-500plug-inDCpowersupply.Inaddition

topoweringthepanel,theDCplug-inpowersupplyalsochargestheback-upbattery.The372-500mustbe

locatedwithin100feetofthepanelusing22AWGwire.Usethefollowingstepstoconnecttheplug-inpower

supply:

OBSERVE POLARITY

1. Using22AWGwire,connectthepanelPWR(J2)rstterminal(+)tothepositiveterminalonthe

power supply.

2.ConnectthepanelPWR(J2)secondterminal(-)tothenegativeterminalonthepowersupply.

3.Plugthepowersupplyintoa120VoltAC,60Hzdedicatedoutletnotcontrolledbyaswitch.

Figure2:DCPowerSupplyConnection

Wire Exit for DC

Power Supply

Model 372-500

DC Plug-in

Power

Supply

Use 22 AWG for

Power Supply connection

RESET

LOAD

BAT

PROG

RED

PWR

MODEL XTL

TX RF RX

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Monitoring Products XTL Series Installationsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Monitoring Products XTL Series