Digital Monitoring Products XR20 Installationsanleitung PDF herunterladen (Seite 25)

XRSuper6/XR20/XR40 Installation Guide Digital Monitoring Products

ComplIanCe

Universal Fire Alarm Specications

22.1 Introduction

The programming and installation specications contained in this section must be completed when installing

the Model XRSuper6/XR20/XR40 in accordance with any of the UL or NFPA re standards. Additional

specications may be required by a particular standard.

22.2 Wiring

All wiring must be in accordance with NEC, ANSI/NFPA 70.

22.3 Police Station Phone Number

The digital dialer telephone number programmed for communication must not be a police station phone

number, unless that phone number is specically provided for that purpose.

22.4 System Maintenance

Proper installation and regular maintenance by the installing alarm company and frequent testing by the end

user is essential to ensure continuous sat isfactory operation of any alarm system. Offering a maintenance

program and acquainting the user with the correct procedure for use and testing of the system is also the

responsibility of the installing alarm company.

22.5 Audible Alarm

Fire Type zones must be programmed to activate an audible alarm. The Bell Action for Fire Type zones must

not be programmed as N (None). See the XRSuper6/XR20/XR40 Programming Guide (LT-0305).

22.6 Fire zone programming

Fire zones must be programmed to activate a trouble on open conditions and an alarm on short conditions.

The swinger bypass function must not be used on any re zones. See the Programming Guide (LT-0305).

22.7 Ground Start

Ground Start phone lines must not be used for UL listed systems.

22.8 Listed Receivers

Operation has been veried with the DMP SCS-1R Security Receiver, Sur-Gard MLR2-E, SG-HLR2-DG, FBII

CP220PB, Osborne-Hoffman Quick-Alert, and Radionics D6500 receivers.

ANSI/UL 985 NFPA 72 (Chapter 2) Specications

Household Fire Warning System Units

23.1 Bell Output Denition

The bell output of the Model XRSuper6/XR20/XR40 must be programmed to operate steady on burglary

alarms and pulsed on re alarms. See the XRSuper6/XR20/XR40 Programming Guide (LT-0305).

23.2 Indicating Circuit Supervision

The DMP Models 865 and 866 Notication Circuit Module must be used on the bell circuit for detection of

shorts and grounds.

23.3 Wireless External Contact

When used, the External Contact of 1101, 1102, or 1103 must be programmed Normally Closed. See the

XRSuper6/XR20/XR40 Programming Guide (LT-0305).

23.4 Wireless Supervision Time

The Zone Information Supervision Time must be 3 minutes. See the XRSuper6/XR20/XR40 Programming

Guide (LT-0305).

23.5 Wireless Fire Verication

When used, the Model 1161 and 1162 wireless smoke detectors must not be programmed as Fire Verication

(FV) zone type. See the XRSuper6/XR20/XR40 Programming Guide (LT-0305).

California State Fire Marshal Specications

24.1 Bell Output Denition

The bell output of the Model XRSuper6/XR20/XR40 must be programmed to operate steady on burglary

alarms and temporal on re alarms. See the XRSuper6/XR20/XR40 Programming Guide (LT-0305).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Monitoring Products XR20 Installationsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Monitoring Products XR20