Digital Monitoring Products Graphic Touchscreen Betriebsanweisung PDF herunterladen (Seite 27)

20 XR150/XR350/XR550 User’s Guide Arming and Disarming

Home/Sleep/Away and Home/Sleep/Away with

Guest System Arming

Area Assignment: Your security system is divided into two or three

separate areas. Motion detectors, inside doors, and other interior

devices are assigned to an Interior and Bedroom areas while

windows and exterior doors are assigned to a Perimeter area.

Arming the system: When arming a Home/Sleep/Away or a Home/

Sleep/Away with Guest system, the keypad displays HOME AWAY

orHOMESLEEPAWAY.IfyouselectAWAY,youarmallareasofthe

system. You will want to arm all areas when leaving with nobody

staying inside. Selecting HOME arms only the Perimeter of the

system. Perimeter arming is when you are staying inside but want

the comfort of knowing the exterior doors and windows are armed.

Perimeter arming allows you to move freely about inside without

setting off any interior alarms. Selecting SLEEP arms the Perimeter

and Interior devices but leaves devices near bedrooms or other

nighttime areas off.

System Ready/System Not Ready Keypad Displays

When all zones in the system are in a normal condition and can

be armed without bypassing, the keypad displays SYSTEM READY.

Ifthereareoneormorezonesthatarenotinanormalcondition,

the keypad displays SYSTEM NOT READY. Pressing any top row

Select key during this display shows the zone number and name

allowing you to investigate the problem.

Home/Sleep/Away and Home/Sleep/Away with

Guest Shortcut Key Arming

Arm Home — Press 3 for 2 seconds to arm the perimeter.

Arm Sleep — Press 7 for 2 seconds to arm the perimeter and

interior areas and leave the bedroom area off.

Arm Away — Press 1 for 2 seconds.

Arming a Home/Sleep/Away or a Home/Sleep/Away

with Guest System

1. Enter your 4-digit user code. The keypad displays HOME

SLEEP AWAY.

2. SelectHOMEtoarmthePerimeteronly.

3. Select SLEEP to arm the Perimeter and Interior.

4. Select AWAY to arm the Perimeter, Interior, and Bedroom.

5. ThesystemdisplaysanyBypassedzonesorfaulted24-hour

orPriorityzones.AfaultedPriorityzonecannotbearmed.

6.

Atthispointyoucanforcearmorbypassanyfaultedzones.

Azonethatisforcearmedwillberestoredintothesystemif

itlaterreturnstonormal.Azonethatisbypassedwillremain

bypasseduntilthesystemisdisarmed.See6athrough6d.

6a. If a problem exists on a zone, the zone name and

problemisshownfollowedbyOKAYBYPASSSTOP.

6b. SelectOKAYtoforcearmthezone(s)beforearming.

6c. SelectBYPASStobypassthezone(s)beforearming.

6d. SelectSTOPtostopthesystemfromarming.Correctthe

zoneproblem(s)andreturntostep1.

7. AHome/Sleep/Away systemkeypaddisplaysHOME SYSTEM

ONifyouselectedHOME,SLEEPSYSTEMONifyouselected

SLEEP,andALLSYSTEMONifyouselectedAWAY.

A Home/Sleep/Away with Guest system keypad displays

HOMEGUEST1(or2)ONifyouselectedHOME,SLEEPGUEST

1(or2)ONifyouselectedSLEEP,andALLGUEST1(or2)ON

if you selected AWAY.

8. If arming the Perimiter, the keypad next displays EXIT: ##

INSTNT and begins to count down the number of seconds

remaining for you to exit. When the delay expires, the exit

zonesarearmed.

9. YoucanselectINSTNTwhileEXIT:##INSTNTisdisplayedto

immediatelyarmallexitzonesandmaketheminstant.The

keypad displays INSTANT.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Digital Monitoring Products Graphic Touchscreen Betriebsanweisung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Digital Monitoring Products Graphic Touchscreen